DaPoets Posted November 14, 2007 Share Posted November 14, 2007 (edited) I did just notice you are using pc3200 ram... you may not be able to get much more out of that setup actually... download Prim95 2.5.x and run it on Small FFT for about 12 hours. If it errors out then you are not stable. be sure to check the box that says something like notify on errors. Edited November 14, 2007 by DaPoets Quote Link to comment Share on other sites More sharing options...
ParoxysM Posted November 14, 2007 Author Share Posted November 14, 2007 Best I could do with my Opty 165 on air was 2.8 (312x9). I got the FSB upto 340 (x8), but the 3dmark score was so much lower. My temps were at 56C @ 100% CPU usage. Quote Link to comment Share on other sites More sharing options...
neles86 Posted November 14, 2007 Share Posted November 14, 2007 i did a 8 hour prime last nite @ 2.6 and was 100% stable....at 2.7 i couldnt even get it thru super pi at 1m.....i might try decreasing the multiplier to x8 then do some benchmarks. At 2.6ghz my vcore is already 1.52. Over 1.6 i think would be pushing it even though i would probably need it for a higher clock... Quote Link to comment Share on other sites More sharing options...
neles86 Posted November 14, 2007 Share Posted November 14, 2007 ParoxysM, wats your current configuration for you opty setup?... Quote Link to comment Share on other sites More sharing options...
DaPoets Posted November 14, 2007 Share Posted November 14, 2007 http://www.ocforums.com/forumdisplay.php?f=3 Quote Link to comment Share on other sites More sharing options...
B.Ob. Posted November 15, 2007 Share Posted November 15, 2007 Above should be a good place to look!! Also neles86, I PM'd you about a pdf I have that I used to OC my pc with. AMD is not as straight forward to OC with as an Intel cpu. Also, temp under 100% will be more important than 0% load. (Another good use for WCG ) Quote Link to comment Share on other sites More sharing options...
ParoxysM Posted November 15, 2007 Author Share Posted November 15, 2007 During summer I'm at 296x9, fall at 301x9, winter I might upgrade Quote Link to comment Share on other sites More sharing options...
PurSuiT Posted November 15, 2007 Share Posted November 15, 2007 I am running my opty @ 2.8 right now, had it @ 2.9Ghz ran stable but my PWM would heat up to over 90c, issue with my MB and lack of power, that was with my old PSU though, Have not try'd since I upgraded. Though PWM temp is 1/2 what it was with old PSU. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.